商品编号：MNA-LAN-PO01-Black

DESCRIPTION
LANTERN 2023-24 Autumn Winter Collection.

※ 关于日本以外地区的运输

充电寶往日本境外的运输受到严格管制。

如果送货地址在日本境外，则不包括充电电池（充电寶）。

本发热装置可以与以下配置電池（USB 输出端口，输出电压：5V，输出电流：2A 或以上）配合使用。

请注意，在这种情况下价格不会改变。

A pullover-style military poncho with wave quilting applied to the outer fabric along with padding.

The 2023 model uses the chest pockets adopted from the U.S. Military Special Forces PCU LEVEL7 Jacket TYPE1 and adjusts the length of the front zipper opening for easier wear and removal.

The three-dimensional hood shape and top-to-bottom waterproof zipper construction provide protection against heavy rain and wind.

It features large pockets that open and close with zippers on both sides of the chest, allowing storage of small items and mobile phones.

The parts where hands can protrude can be secured with snap buttons, making it less likely to shift during wear.

This makes it suitable for outdoor activities such as camping, as well as cycling and walking.

Available in unisex as it is free size.

The outer fabric uses nylon taslan with a Tarslan finish, woven at high density using nylon thread to achieve lightweight yet durable and water-resistant qualities.

This poncho is exceptionally lightweight and functional.

◆Characteristics of Heating Device Wear

It is cotton padding wear that can adjust the temperature with the power supply temperature adjustment switch on the left sleeve. The heating device is a system that works by connecting the charging battery to the USB plug of the machine, and the switch changes color depending on the set temperature. The heat source is made from carbon fiber, and it warms from the core of the body by far-infrared ray effect. The operating time of the heating device varies depending on the battery capacity and temperature setting.

◆How to use the heating device

1: Insert the charging battery into the left side storage pocket and plug in the USB plug. * Please check the remaining amount of charge battery and energization (the battery protection function is not activated).

2: Press and hold the power switch on the chest for 2 to 3 seconds, and the LED will blink in 4 colors and the heating device will be activated. It heats up rapidly while red (Ultrahigh temperature) is flashing. It will automatically change to purple (medium temperature) after about 5 minutes without operating the switch.

3: After turning on the power, you can change the temperature to your preference by briefly pressing the switch. (* The lighting color changes depending on the temperature.)

4: Press and hold the power temperature switch on the chest (2-3 seconds) and the LED will blink in 4 colors and the heating device will stop.

◆About charging battery

USB output port output voltage: 5V output current: 2A or more usable time (5000 mAh)

Ultrahigh Temperature (Red): 50 °C/1.85 H

High Temperature (Yellow): 40 °C/2.5 H

Medium Temperature (Purple): 30 °C/3.75 H

Low Temperature (Blue): 20 °C/7.5 H (* The above description applies when the ambient temperature is 5 °C.) Temperature and time are approximate. Not an absolute value.

◆ATTENTION

・We recommend wet cleaning at a dry cleaner's. Please refer to the laundry name for details. (* Please be sure to remove the rechargeable battery.)

・It was planned and produced as supplementary heating clothing to be worn on clothes. Do not use it for any other reason.

・Please be careful not to burn yourself

・Please note that we are not responsible for any damage, repair, accident, or other malfunction that may occur if the product is used for purposes other than its intended purpose.