DESCRIPTION
LANTERN 2022-23 Autumn Winter Collection.

Please note that this item cannot be shipped outside Japan.

Pullover type military poncho with wave-quilted outer fabric and padding.
The hood is three-dimensionally shaped and the watertight zipper is tightened to the top to prevent strong wind and rain.
Large pockets on the chest with zippers on both sides for storing small items, cell phones, etc.
The parts where hands can be reached can be fastened with snap buttons, and since it is hard to slide off even if the wearer moves when wearing it, it is useful not only in outdoor fields such as camping, but also when cycling or walking.
Available in FREE SIZE for both men and women.
The outer fabric is woven densely using taslan processed nylon yarns to create a lightweight yet resilient fabric.
Using nylon taslan with excellent durability and water repellency to have a firmness and resilience while being lightweight.
It is a very lightweight and functional poncho.

◆Characteristics of Heating Device Wear

It is cotton padding wear that can adjust the temperature with the power supply temperature adjustment switch on the left sleeve. The heating device is a system that works by connecting the charging battery to the USB plug of the machine, and the switch changes color depending on the set temperature. The heat source is made from carbon fiber, and it warms from the core of the body by far-infrared ray effect. The operating time of the heating device varies depending on the battery capacity and temperature setting.

◆How to use the heating device

1: Insert the charging battery into the left side storage pocket and plug in the USB plug. * Please check the remaining amount of charge battery and energization (the battery protection function is not activated).

2: Press and hold the power switch on the chest for 2 to 3 seconds, and the LED will blink in 4 colors and the heating device will be activated. It heats up rapidly while red (Ultrahigh temperature) is flashing. It will automatically change to purple (medium temperature) after about 5 minutes without operating the switch.

3: After turning on the power, you can change the temperature to your preference by briefly pressing the switch. (* The lighting color changes depending on the temperature.)

4: Press and hold the power temperature switch on the chest (2-3 seconds) and the LED will blink in 4 colors and the heating device will stop.

◆About charging battery

USB output port output voltage: 5V output current: 2A or more usable time (5000 mAh)

Ultrahigh Temperature (Red): 50 °C/1.85 H

High Temperature (Yellow): 40 °C/2.5 H

Medium Temperature (Purple): 30 °C/3.75 H

Low Temperature (Blue): 20 °C/7.5 H (* The above description applies when the ambient temperature is 5 °C.) Temperature and time are approximate. Not an absolute value.

◆ATTENTION

・We recommend wet cleaning at a dry cleaner's. Please refer to the laundry name for details. (* Please be sure to remove the rechargeable battery.)

・It was planned and produced as supplementary heating clothing to be worn on clothes. Do not use it for any other reason.

・Please be careful not to burn yourself

・Please note that we are not responsible for any damage, repair, accident, or other malfunction that may occur if the product is used for purposes other than its intended purpose.

◆Shipping out of Japan

*Please contact us for details as some countries are unable to ship.

*Please understand that we will ship the battery and the code of the clothing in "connected" state.